Plumbing Repair & Installation Services

Pour a bucket of water into the sump pit and watch to see if the pump activates and clears the water out. If it doesn't kick on, runs continuously, or makes unusual noise during the test, you should have it inspected before the next heavy rain.

The banging sound is called water hammer, which happens when water flow is suddenly stopped, and the pressure has nowhere to go. It can usually be resolved by adjusting the pressure regulator or installing water-hammer arrestors on the affected lines.

A dripping faucet is almost always caused by a worn washer, O-ring, or cartridge inside the valve that no longer creates a watertight seal. It's a small fix that's worth investing in early since even a slow drip wastes a lot of water.

The timeline will depend on the size of your home and the extent of the work, but most whole home repiping projects are completed within two to three days. The right plumber will work to minimize disruption to your household throughout the process.

Pipes in exterior walls, unheated crawl spaces, and areas with poor insulation are most vulnerable when temperatures drop sharply. Keeping cabinet doors open under sinks along exterior walls and allowing faucets to drip slightly during cold snaps can help prevent a freeze.

Your main shutoff valve is located near the water meter, which is often found in the basement, crawl space, garage, or outside along the foundation. Knowing where it is before an emergency happens can save you from substantial water damage.

Grease, oil, coffee grounds, fibrous foods, and anything that doesn't break down easily in water are hard on your drain lines. These materials accumulate over time and restrict flow even when only small amounts go down regularly.

Disposals jam most often when the wrong materials go through them, including fibrous vegetables, grease, or large food scraps. Running cold water before, during, and after use helps keep things moving and reduces the risk of jamming.

A water softener targets hard minerals like calcium and magnesium that cause scale buildup, while a water filtration system removes a broader range of contaminants, including chlorine, sediment, and other impurities. Some homes benefit from having both systems working together.

Scale buildup on your faucets and showerheads, spots on dishes after washing, and dry skin and hair after bathing are all signs your water has a high mineral content. A water test can confirm whether a softener is the right solution.

Backflow occurs when water flows through your plumbing system in the wrong direction, which can allow contaminated water to mix with a clean water supply. Backflow prevention devices stop this from happening and are often required by local code for commercial properties.

Tree roots naturally seek out moisture and can work their way into small cracks in sewer and water lines over time. Once inside, they expand and can cause serious blockages or break the pipe apart.

Rusty or discolored water, a rumbling noise during heating cycles, inconsistent water temperatures, and visible corrosion around the tank are worth taking seriously. Catching these early gives you time to plan a replacement before you run out of hot water.

Persistent odors usually indicate a buildup deep in the pipe that surface cleaning can't reach, or a dry P-trap allowing sewer gas to come back up through the drain. A professional cleaning takes care of the source of the smell.

Trenchless pipe replacement allows professional plumbers to repair or replace damaged pipes with minimal digging, which means less disruption to your yard and landscaping. The right method depends on the condition and location of your existing pipes.

Frequent drain backups, gurgling sounds coming from multiple fixtures, foul odors in your yard, and patches of unusually green grass over your sewer line are all signs that something is wrong underground. A sewer line inspection can confirm whether repair or replacement is the right call.

A slab leak occurs when a pipe running beneath your home's concrete foundation develops a crack or break. It's a serious issue because the water can erode the soil beneath the slab and compromise your foundation.

It depends on the unit's age and the nature of the problem. Water heaters older than ten years with recurring issues are usually better candidates for replacement, since the cost of repeated service calls adds up quickly.

Most homes benefit from a professional drain cleaning once a year, though homes with older pipes or heavy usage may need it more frequently. Regular cleaning prevents the buildup that can turn a slow drain into a full blockage.

Low water pressure affecting multiple fixtures at once usually points to a problem with the main water line, a pressure regulator issue, or major buildup inside your pipes. A local plumber can pinpoint the source and recommend the right solution.

A running toilet is probably caused by a faulty flapper, a worn fill valve, or a float set too high inside the tank. Left unaddressed, a running toilet can waste a large amount of water every single day.

Shut off the main water supply to your home immediately to stop the flow of water. Then call a plumber as quickly as possible and move any furniture or belongings away from the affected area while you wait.

Unexplained increases in water bills, walls with damp spots, and the sound of running water when everything is turned off are all worth paying attention to. If you notice any of these, it's a good idea to have a plumber inspect your system before the damage spreads.